So I've been keeping up with the news and the oil spill is still a huge problem. I apologize for not posting as much lately. There are a couple of reasons for this, I wanted to leave my oil spill solution suggestion up at the top of the blog for a while and I've been a little busy of late.
Don't worry though. I'll be posting some new stuff here in the next couple weeks. I think I will talk a little about some flex roll technology being installed for some press rebuilds. I will also try to add more troubleshooting tips as these seem to be the most popular pages. If there is anything in particular you'd like to hear about just shoot me an email.
Thank you for being a part of this blog, and I hope you've found some of the information to be helpful.
skip to main |
skip to sidebar
This is a blog about paper making in general, and the experiences I've had as an engineer in the industry. I will try to relate my experiences so that they may apply to other industries and situations. I welcome any feedback and will do my best to field any questions that come my way.
Contact Me
Posts
Blog Archive
Key Words
Paper making process Engineer alkaline Acid size Press Fourdrinier flooded nip rod metering Starch biocide Pulp wood softwood Hardwood gap Former winder Converting shoe Press tri-nip Center roll breaker stack calender Dandy lumpbreaker vacufoil suction pickup trim Squirt SHEETER calcium carbonate Alum doctor blade
No comments:
Post a Comment